If your watch has not been worn for several days, adjust it before setting the time, date or date. Yes, even if it's an automatic watch, if you don't wear it, all the watches will lose power. Fortunately, all models of the winding organ are the same. If your pennahai watch has a date window, you should always link the watch before setting the date. How to adjust it depends on whether your watch is fast or not, and how to repair it. This article is about peinahai.
1. Up chaining is the standard procedure for all penahai (in most cases) with rotating crowns. All pennahai watches use the same method. Let's teach you how to turn the crown counter clockwise until the crown is loosened without thread. Turn the handle clockwise 30 times to make the watch core top. Here, it's very difficult for peinahai to get entangled. If your panahai is not the latest model, your design will be very simple. However, depending on the age of the watch, you may have some special instructions to adjust the time / date of the watch. Read the above sections carefully.
2. One of the best ways to keep a watch running accurately for a long time is to set the spring on the watch correctly. Ideally, whether you're wearing it on your wrist or in a spring case, the watch should always rotate at the top 3 / 4 of the spring to prevent clutch wear. For an automatic watch, the spring needs about 80% to 90% tension to be considered fully tightened. The usual action is to keep the spring close to 50% to 60%. This watch can make your watch about 80% tight.
Warm tips: it's our wish to use watch for a long time. It's what we should do to love watch, and it's also indispensable in our life. After long-term use, pay attention to maintenance. If there is any problem, it should be repaired in time. If you have any questions, please call the service hotline and send the watch to peinahai service center in time.